Adhesives
Nino Supa-Sticky Tile Adhesive
This product is a high polymer resin powder combined with methyl cellulose, cement, and silicon sand. It features for strong adhesion and is very easy to work with.
Product Information
Instructions
- Clean work area surfaces so as not to affect adhesiveness due to debris. If dusts, oil contamination or loose foundation are found, clean or reinforce before application. If the surface is dry, moisturize it before implementation.
- Combine water with adhesive and mix thoroughly with electric mixer, then use toothed trowel to spread into desired thickness.
- Apply light pressure to place their tiles, make their back surfaces fully filled with adhesive and tap lightly with rubber mallet.
- Please simply adjust tile positions with rulers after attaching them.
Precautions
- Avoid breathing in powder while adding water, face masks are recommended.
- If the eyes inadvertently come into contact with the materials, immediately flush the eyes with water.
Storage
Product needs to be kept dry, Expiration time: 6 months
Packaging
25± 3% kg/ paper bag
Technical Specifications
| Nino Supa-Sticky Tile Adhesive | |
| Tensile Strength | Over 12 kgf / c㎡ (CNS12611-7 days） |
| Blended Water | 5~6 kg |
| Time Required | Indoors :3-5 minutes / room Outdoors: 10-15 minutes |
| Unit Consumption | 8-10 ㎡（Thickness 2~3 mm) |
| Applicable Surfaces | RC or cement foundation areas, indoor/ outdoor mosaics, square tiles, wall tiles, ground tiles, rock slabs, rock bricks, or other applications on hard surfaces |
